Avaya AP-4, AP-6, AP-5 manual Logging into the Http Interface

Logging into the HTTP Interface

Logging into the HTTP Interface

Once the AP has a valid IP Address and an Ethernet connection, you may use your web browser to issue commands.

The Command Line Interface (CLI) also provides a method for issuing commands using Telnet or a serial connection. This section covers only use of the HTTP Interface. For more information about issuing commands with the CLI, refer to The Command Line Interface.

Follow these steps to view the available commands supported by the AP’s HTTP interface:

1. Open a Web browser on a network computer.

NOTE:

The HTTP interface supports the following Web browser:

—Microsoft Internet Explorer 6 with Service Pack 1 or later

—Netscape 6.1 or later

6-2 Avaya Wireless AP-4/5/6 User’s Guide