Avaya AP-6, AP-4, AP-5 manual Auto Configuration Parameters, Syntax Examples

Auto Configuration Commands

Auto Configuration Parameters

These parameters relate to the Auto Configuration feature which allows an AP to be automatically configured by downloading a specific configuration file from a TFTP server during the boot up process.

Name	Type	Values	Access	CLI Parameter
Auto	Group	N/A	R	autoconfig
Configuration
Auto	Integer	enable (default)	RW	autoconfigstatus
Configuration		disable
Status
Auto Config	DisplayString	User Defined	RW	autoconfigfilename
File Name
Auto Config	IpAddress	User Defined	RW	autoconfigTFTPaddr
TFTP Server IP
Address

Syntax Examples

[Device-Name]>set autoconfigstatus <enable/disable>

[Device-Name]>set autoconfigfilename <filename>

Enter the filename of the configuration file that is used if the AP is configured for Static IP.

[Device-Name]>set autoconfigTFTPaddr <IP address> Enter the TFTP server address that is used if the AP is configured for Static IP.

A-42 Avaya Wireless AP-4/5/6 User’s Guide