Avaya AP-4, AP-6, AP-5 manual Disable

Network

You can configure and view the following parameters within the Link Integrity Configuration screen:

Parameter	Description
Enable Link	Place a check mark in the box provided to
Integrity	enable Link Integrity.
Poll Interval	The interval between link integrity checks.
(milliseconds)	Range is 500 - 15000 ms in increments of
	500 ms; default is 500 ms.
Poll	The number of times a poll should be
Retransmissions	retransmitted before the link is considered
	down. Range is 0 to 255; default is 5.
Target IP Address	This entry specifies the IP address of a host
Entry	on the network that the AP will periodically
	poll to confirm connectivity. The table can
	hold up to five entries. By default, all five
	entries are set to 0.0.0.0. Click Edit to update
	one or more entries. Each entry contains the
	following field:
	• Target IP Address
	• Comment (optional)
	• Status: Set this field to Enable to
	specify that the Access Point should poll
	this device. You can also disable an
	entry by changing this field’s value to
	Disable.

Avaya Wireless AP-4/5/6 User’s Guide 4-19