CLI Commands

set

Configures the value of the specified parameter. To see a definition and syntax example, type only set and then press the Enter key. To see a list of available parameters, enter a space, then a question mark (?) after set (example: set?).

As shown in the following examples, parameters may be set individually or all parameters for a given table can be set with a single statement.

Syntax

[Device-Name]>set <parameter> <value>

[Device-Name]>set <table> <index> <argument 1> <value 1> ...

<argument N> <value N>

Configuring Objects that Require Reboot

Certain objects supported by the Access Point require a device reboot for the changes to take effect. To inform you of this behavior, the CLI provides informational messages when you have configured an object that requires a reboot. The following messages are displayed as a result of the configuring such object or objects.

A-32

Avaya Wireless AP-4/5/6 User’s Guide

Page 378
Image 378
Avaya AP-4, AP-6, AP-5 manual Set, Configuring Objects that Require Reboot