Dell Comprehensive Specifications of P2214H and P2414H Monitors

Electrical Specifications

Model	P2214H/P2414H
Video input signals	• Analog RGB, 0.7 Volts +/- 5%, positive polarity at
	75 ohm input impedance
	• Digital DVI-D TMDS, 600 mV for each differential
	line, positive polarity at 50 ohm input impedance
	• DP 1.2 signal input support*
Synchronization input signals	Separate horizontal and vertical synchronizations,
	polarity-free TTL level, SOG (Composite SYNC on
	green)
AC input voltage/frequency/	100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.2 A
current	(typical)
Inrush current	• 120 V: 30 A (Max)
	• 240 V: 60 A (Max)

*Support DP1.2 (CORE) specification. Excludes High Bit Rate 2 (HBR2), Fast AUX transaction, Multi-stream transport (MST), 3D stereo transport, HBR Audio (or high data rate audio)

Physical Characteristics

Model	P2214H	P2414H
Connector type	15-pin D-subminiature,	15-pin D-subminiature,
	blue connector; DVI-D,	blue connector; DVI-D,
	white connector; DP, black	white connector; DP, black
	connector	connector
Signal cable type	• Digital: detachable, DVI-	• Digital: detachable, DVI-
	D, solid pins, shipped	D, solid pins, shipped
	detached from the	detached from the
	monitor	monitor
	• Digital: DisplayPort, 20	• Digital: DisplayPort, 20
	pin	pin
	• Analog: attachable, D-	• Analog: attachable, D-
	Sub, 15 pins, shipped	Sub, 15 pins, shipped
	attached to the monitor	attached to the monitor
Dimensions (with stand)
Height (extended)	483.6 mm (19.04 inches)	499.0 mm (19.65 inches)
Height (compressed)	354.2 mm (13.94 inches)	369.0 mm (14.53 inches)
Width	512.7 mm (20.19 inches)	565.6 mm (22.27 inches)

12 About Your Monitor