
Instant EtherFast® Series
Add Subnet
The Add Subnet screen allows you to add an IP interface.
•VLAN - The VLAN associated with this IP interface.
•Select - Use this option to create or modify a VLAN.
•IP Address - The IP address associated with the specified VLAN interface.
•Subnet Mask - A template that identifies the address bits in the host address used for routing to specific subnets.
•Proxy ARP - Enable or disable the Proxy Address Resolution Protocol.
•RIP - Enable or disable the Routing Information Protocol for unicast routing.
•OSPF - Enable or disable the Open Shortest Path First protocol.
•DVMRP - Enable or disable the
Select OK to confirm the changes. Select Cancel to cancel any changes.
EtherFast® Layer 3 Management
Protocol Configuration
The Protocol Configuration screen is used to globally enable or disable uni- cast or multicast routing protocols for the Switch.
•ARP - Address Resolution Protocol. Select Advanced for additional configuration (see page 23).
•Proxy ARP - Enable or disable the Proxy Address Resolution Protocol.
•RIP - Enable or disable the Routing Information Protocol for unicast routing. Select Advanced for additional configuration.
•OSPF - Enable or disable the Open Shortest Path First protocol. Select Advanced for additional configuration.
•DHCP Relay - Enable or disable the Dynamic Host Configuration Protocol relay. Select Advanced for additional configuration.
•IGMP Snooping - Enable or disable IGMP multicast filtering. Select Advanced for additional configuration.
•DVMRP - Enable or disable the
Select Apply to make changes. Select OK to return to the previous panel. Select Cancel to cancel any changes.
56 | 57 |