Instant EtherFast® Series
Switch Information
The Switch Information screen displays hardware and firmware version num- bers for the main board, as well as the power status.
•Hardware Version - Hardware version of the main board.
•Firmware Version - System firmware version in ROM.
•Serial Number - Serial number of the main board (MAC address of the Switch).
•Port Number - Number of ports available on this Switch.
•Power Status - Shows if power is active or inactive.
•Redundant Power Status - Status of redundant power supply.
•Fan Power Status - Shows if power to fan is active or inactive.
•G1 Information - Speed of the first Gigabit port.
•G2 Information - Speed of the second Gigabit port.
Select OK to return to the previous panel.
EtherFast® Layer 3 Management
Management Setup Menu
The Management Setup Menu screen allows you to configure the IP address for the Switch, serial port settings for console management, SNMP parameters, and user privileges.
•Network Configuration - Includes IP setup, ping facility, and HTTP setup for the
•Serial Port Configuration - Sets communication parameters for the serial port, including baud rate, console
•SNMP Configuration - Activates authentication failure traps and configures communities and trap managers.
•User Configuration - Sets the user names and passwords for system access.
•TFTP Download - Downloads new version of firmware to update your sys- tem.
•Configuration File - Allows downloading of a configuration file.
•Management Access Control - Allows management of user access to the Switch.
Select OK to return to the previous panel.
16 | 17 |