Instant EtherFast® Series

BOOTP Relay Database Configuration

The BOOTP Relay Database Configuration screen allows you to specify the IP address for a BOOTP relay server.

Index Server Address - Used to define any preferred DHCP servers or the outbound subnetwork for relaying a DHCP request broadcast. (Up to five entries are permitted.)

Select OK to return to the previous panel. Select Add to add another entry.

Add BOOTP Relay Server

The Add BOOTP Relay Server screen allows you to add an entry.

IP Address - IP address of server.

Select OK to return to the previous panel. Select Cancel to cancel any changes.

EtherFast® Layer 3 Management 24-Port 10/100 + 2-Port Gigabit Ethernet Switch

IGMP Snooping Configuration

The IGMP Snooping Configuration allows you to set up IGMP snooping. IGMP snooping is used to monitor for any attached hosts who want to receive a specific multicast service. It looks up the IP Multicast Group used for this service and adds any port that received a similar request to that group. (This is the screen and options displayed for a Switch in multilayer mode.)

IGMP Router Timeout - A switch port that stops receiving multicast protocol packets for this interval will be removed from the IGMP forwarding list. The range is 3-5 minutes.

IGMP Group Timeout - The time between last spotting an IGMP Report message for an IP multicast address on a specific port and the Switch removing that entry from its list. The range is 3-5 minutes.

Select Apply to make changes. Select OK to return to the previous panel. Select Cancel to cancel any changes.

70

71

Page 39
Image 39
Linksys EF1324 manual Bootp Relay Database Configuration, Add Bootp Relay Server, Igmp Snooping Configuration