Instant EtherFast® Series
2.The following screen will appear. Enter a Name for this connection. In the example below, the name of the connection is EF1324. Click the OK but- ton.
3.The following screen will appear. In the bottom drop down box labeled Connect using:, click the arrow and choose the COM port that the Switch will be connected to. In the example below, COM1 is the port selected. Click the OK button.
EtherFast® Layer 3 Management
4.When the following screen appears, make sure that the port settings are as follows:
BAUD RATE: 19200
DATA BITS: 8
PARITY: None
STOP BITS: 1
FLOW CONTROL: None
Click the OK button.
Web Management
The IP address is already configured on the Switch by default. Use a standard Web browser (Internet Explorer 4.0 or above, or Netscape Navigator 4.0 or above is suggested) from any computer attached to the network. The Switch has a default IP address of 192.168.1.254 and a default subnet address of 255.255.255.0.
8 | 9 |
