Instant EtherFast® Series
MAC Filtering Configuration
The MAC Filtering Configuration screen allows you to filter out specified MAC addresses. Any node that presents a security risk or is malfunctioning can be filtered from this Switch. Security filtering can be used to drop all the traffic from a host device based on a specified MAC address.
To add a MAC address, use Add. To delete an address, highlight it with the cur- sor and press Enter. Select Apply to make changes. Select OK to return to the previous panel. Select Prev Page to view the previous page. Select Next Page to view the next page. To display a specific page, set the page number in the Page field and then press Apply.
EtherFast® Layer 3 Management
Add MAC Address Filter
The Add MAC Address Filter screen allows you to add MAC addresses.
•MAC Address - The MAC address of a host device attached to this Switch.
Select OK to confirm the changes. Select Cancel to cancel any changes.
Security Mode
The Security Mode menu is used to enable/disable the Learning function.
•Learning Function - Enables/disables Learning function for security filtering.
Select Apply to make a change. Select OK to return to the previous panel. Select Cancel to cancel any change.
78 | 79 |
