To display the DVD mode screen
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1.Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2.Keep pushing the foot brake and release the parking brake once then engage it again.
3.While the parking brake is being engaged the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”
•If you try to activate the auxiliary device while driving, the display will show the
Caution
•Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.
•Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.
•If you switch the power or Ignition Key OFF or change sources during playback, playback will continue where you left off when you resume playback.
•If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen: 
•Play Position Memory Function
Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again.
1 Press SOURCE/POWER to display the main menu screen.
2 Turn the Rotary encoder and select DVD PLAYER from the menu. Then, press the Rotary encoder to execute the selection.
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts to play the disc. The display shows the Function Guide.
When an optional Alpine DVD player is connected: Insert a disc into the DVD/video CD/CD player, the player starts playing.
To eject the disc
Press c.
•Press 6 (GUIDE) during DVD/Video CD playback to turn on or off the Function Guide display.
In the ON position:
The Function Guide display will always be shown. In the OFF position:
The Function Guide display will disappear after approx. 5 seconds if no button is pressed.
If you want to display the Function Guide screen again, press any one of the Function buttons.
•When the Function Guide display is ON, you cannot switch the display mode by pressing and holding WIDE/DISP for at least 2 seconds.
•The reverse side of a
Remove the disc, turn it over, and reinsert it.
•DO NOT insert discs containing maps for the navigation system. Doing so could result in damage.
•When video CDs to which titles are input are inserted, the list of the titles can be displayed to select a desired disc (Displaying the title list, pages 24 and 25). A DVD disc cannot be titled. "DVD VIDEO" is displayed at the title list.
•Refer also to "DVD Setup" (pages 28 to 31).
Continued
