<
Button Performs playback.
Press and hold for at least 2 seconds for slow motion playback.
=BAND Button
Switches the band of Audio or Disc mode.
>MODE Change Switch
When operating the connected DVD player/DVD changer, switch to the EXT DVD side.
•Depending on the disc or playback status, certain operations
may not work. In this case, the
mark is displayed on the monitor screen.
Operating the Navigation (sold separately)
1
!
9
8
7
2
3
6
5
4
"
(Rear of the Remote Control)
1NAV. transmission indicator
The transmission indicator lights for a few seconds when the mode selector switch is set to “NAV.”.
2DTR (DETOUR) Button
Automatically recalculates route if a road block or traffic congestion is encountered.
3LIST Button
Displays list of the streets currently set for the route. To return to the guidance mode, press the DISP button.
4DEL. DEST. Button Deletes current destination.
5OK button
Executes numeral input and starts searching.
6N/H Button
Toggles between North UP and Heading UP orientation.
7CANC. Button
Cancels current display screen and switches back to previous screen with menus.
8SCALE UP/DN Buttons
9VOICE Button
Initiates vocal instruction for next route maneuver or repeats last instruction.
!MODE Button
Inputs numerals using the numeric keypad, DEL. and +10 buttons.
After pressing the MODE button, the following buttons will be pressed while the status indicator is blinking: numerals
"MODE Change Switch
Sets this switch to the “NAV.” side to operate a connected Alpine navigation system.
Operating a separately sold TV monitor
•To operate a separately sold Alpine TV monitor, press the mode change switch on the rear of the remote control unit. Operate while the transmission indicator is blinking.
•Included remote control unit operation seal: Apply the seal for the type of TV monitor you are using to the rear of the remote control unit.
•Operation may differ or may not be possible for some products. Also refer to the product’s operating instructions.
