Indication for DVD/Video CD
NO DISC | (Displayed only in | |
monitor)) | ||
|
•No disc is inserted.
-Insert a disc.
•Although a disc is inserted, “NO DISC” is displayed and the unit does not start to play or eject the disc.
-Remove the disc by following these steps: Press c for at least 3 seconds.
•Remote control operation is not possible.
-For some discs or playing modes, certain operations are not possible. This is not a malfunction.
•Protective circuit is activated to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
-Leave the power OFF until the temperature decreases and then turn the power ON again.
VIDEO SIGNAL SYSTEM IS
NOT CORRECT
•PAL disc is loaded.
- Load an NTSC disc
LOADING ERROR | (Displayed in the rear monitor) |
| (Displayed in the rear monitor) |
| |
EJECT ERROR | |
|
|
•Mechanism error.
1)Press c and eject the disc.
If not ejecting, consult your Alpine dealer.
2)When the error indication remains after ejecting, press c again.
If the error indication still does not turn off after pressing c for a few times, consult your Alpine dealer.
DISC ERROR | (Displayed in the rear monitor) |
|
|
•Scratched disc, contaminated disc/poor recording/disc incompatible with this unit
-Press c.
-Change the disc.