HP 7000 dl Router manual Encapsulation frame-relay ietf

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

encapsulation frame-relay ietf

Use the encapsulation frame-relay ietf command to configure the encapsulation on a virtual Frame Relay interface as IETF (RFC 1490). Currently, this is the only encapsulation setting. Settings for this option must match the far-end router’s settings in order for the Frame Relay interface to become active.

Syntax Description

No subcommands.

Default Values

By default, all Frame Relay interfaces use IETF encapsulation.

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Usage Examples

The following example configures the endpoint for IETF encapsulation:

(config)#interface frame-relay 1 (config-fr 1)#encapsulation frame-relay ietf

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 569