HP 7000 dl Router manual Ip ftp access-class policyname

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip ftp access-class <policyname> in

Use the ip ftp access-class in command to assign an access policy to all self-bound File Transfer Protocol (FTP) sessions.

Syntax Description

<policyname> Specifies the configured access policy (ACP) to apply to inbound FTP traffic

Default Values

By default, all ftp access is allowed.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example applies the configured ACP (labeled Inbound_FTP) to inbound FTP traffic: (config)#ip ftp access-class Inbound_FTP in

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 285