HP 7000 dl Router manual This Step is only Valid for T1 Interfaces

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

Usage Examples

The following example creates a Frame Relay endpoint and connects it to the t1 1/1 physical interface:

1. Create the Frame Relay virtual endpoint and set the signaling method:

(config)#interface frame-relay 1 (config-fr1)#frame-relay lmi-type cisco

2. Create the sub-interface and configure the PVC parameters (including DLCI and IP address):

(config-fr 1)#interface fr 1.1

(config-fr1.1)#frame-relay interface-dlci 17

(config-fr 1.1)#ip address 168.125.33.252 255.255.255.252

3.Create the tdm-group of 12 DS0s (64K) on the t1 physical interface:

(THIS STEP IS ONLY VALID FOR T1 INTERFACES.)

(config)#interface t1 1/1

(config-t11/1)#tdm-group 1 timeslots 1-12 speed 64 (config-t1 1/1)#exit

4.Connect the Frame Relay sub-interface with port t1 1/1: (config)#bind 1 t1 1/1 1 fr 1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 723