HP 7000 dl Router manual Bonding txnull-timer seconds

SROS Command Line Interface Reference Guide BRI Interface Configuration Command set

bonding txnull-timer <seconds>

Use the bonding txnull-timercommand to specify the value (in seconds) for the answering endpoint negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds>	Specifies the number of seconds the endpoint waits to detect the BONDING
	negotiation frame pattern from the originating endpoint (after answering a call)
	before considering the BONDING negotiation a failure

Default Values

<seconds> 10 seconds

Command Modes

(config-bri 1/2)# BRI Interface Configuration Mode required

Functional Notes

Specifies the length of time the answering endpoint attempts to detect the BONDING negotiation pattern from the originating endpoint before deciding the BONDING call has failed. It may be necessary to shorten this timer if the DTE equipment using the BONDING module also has timer constraints for completing non-BONDING parameter negotiation.

Usage Examples

The following example defines a txnull-timer value of 8 seconds:

(config)#interface bri 1/2 (config-bri 1/2)#bonding txnull-timer 8

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 562