HP 7000 dl Router manual Qos-policy out mapname

SROS Command Line Interface Reference Guide PPP Interface Configuration Command Set

qos-policy out <mapname>

Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no form of this command to remove the map from the interface. The out keyword specifies that this policy will be applied to outgoing packets.

Syntax Description

<map name>	Enter the name of a previously-created QoS map (see qos map
	<mapname><sequence number> on page 326 for more information).

Default Values

No default value is necessary for this command.

Command Modes

(config-interface)#	Interface Configuration Mode. Valid interfaces include: virtual PPP (ppp 1) and
	virtual Frame Relay interfaces (fr 1)

Usage Examples

The following example applies the QoS map VOICEMAP to the PPP 1 interface:

(config)#interface ppp 1

(config-ppp1)#qos-policy out VOICEMAP

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 776