HP 7000 dl Router manual Config#do clear arp-cache

Common Commands

do

Use the do command to execute any command, regardless of the active configuration mode.

Syntax Description

No subcommands.

Default Values

No defaults required for this command.

Command Modes

Any Configuration Mode.

Functional Notes

Use the do command to view configurations or interface states after configuration changes are made without exiting to the Enable mode.

Usage Examples

The do command provides a way to execute commands in other configuration modes without taking the time to exit the current configuration mode and enter the desired one. The following example shows the do command used to remove all dynamic entries from the ARP cache:

(config)#do clear arp-cache

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 928