RX9001 User Guide
Use standard wiring and Phoenix connectors.
ENGLISH
A/V component
Tip In case you experience communication
problems when using the RS232 wiring Extender solution illustrated above, make sure
that the GND pin on the Extender is grounded correctly on the side of the A/V component.
Connecting to a Lutron RadioRa Lighting System
1Connect the Lutron Lighting System to the Extender via the RS232 port. Refer to chapter ‘Connecting to Serial Equipment’ on page 7.
2Open Wizz.it Ex.
3Open the configuration file.
4Insert the Lutron Lighting System in the configuration file.
Note If there are multiple Extenders, add these Extenders to the configuration file via the System properties before configuring the Lutron Lighting System.
5Open the Lutron Lighting System Properties.
6Adjust the settings of the Lutron Lighting System:
1 Select the Extender to which the Lutron Lighting System is connected. 2 Select the port on the Extender to which it is connected.
8
