Marantz RX9001 manual Connecting the Extender to the Network, Using the Extender

RX9001 User Guide

Inserting a Multimedia Server in the Network

You can add an Escient Media Server or an Imerge Sound Server to your network.

1Connect the Server to the router.

2Open Wizz.it Ex.

3Open the configuration file.

4To insert a Multimedia Server in the configuration file, click the ‘Insert Escient Media Server’ button or the ‘Insert Imerge Sound Server’ button.

5Open the Multimedia Server Properties.

6Adjust the settings of the Multimedia Server:

•If the Multimedia Server has a fixed IP-address, fill in that IP-address.

•If it has a dynamic IP-address, fill in its host name.

Connecting the Extender to the Network

The Extender is normally ready for use and does not need to be configured. The settings need only be adjusted in case you wish to operate the Extender with a fixed IP-address, or if there is more

than one Extender in the Wireless Network.

Note Before you start using or configuring the Extender, check if any firmware updates are available in the Downloads section on http://www.marantz.com in the Home Entertainment section of your region.

Refer to the chapter ‘Firmware Update’ on page 13 for further details.

Using the Extender

1Connect the Extender to the router with a straight Ethernet cable.

Extender

Straight

Ethernet cable

Router

2Set the Extender ID switch to 1 or to an ID that is not yet used by another Extender in

the Wireless Network.

3Set the Configuration switch to 1 for use:

Configuration switch: 1

9