Avaya M-ACCF/SF manual Configuring the M-ACC Module, ACC Module Default Settings

Chapter 3 Installation

Configuring the M-ACC Module

The M-ACC module can be configured using the text-based Command Line Interface (CLI) utility and the Terminal Interface. The LEC Information Table, ATM Access module and ATM port information can be viewed using CajunView™.

For instructions on the text-based utility, see Chapter 4. For information about the graphical user interfaces, see Chapter 5.

For instructions on the use of the graphical user interfaces, refer to the Manager User’s Guide on the CD.

M-ACC Module Default Settings

The default settings for the M-ACC module are determined by its software. These default settings are subject to change in newer versions of the software for the M-ACC module which can be downloaded from the Avaya Network Software Download WWW site ( http://www.avayanetwork.com/). See the Release Notes for the most up-to-date default settings.

Table 3.3 M-ACC Module Default Settings

Function	Default Setting
Framing Mode	SONET
UNI	3.1
Port Speed	OC-12c
VLANs	VLAN 1, associated with ELAN
	“default”
SNMP Community	public
ATM Access Module Terminal Menu	Junior operator: read
Interface Passwords	Senior operator: write
	Administrator: admin

Connecting to the Serial Port

The M-ACC module has one serial port on the front of the switch for connecting a terminal, a terminal emulator, or a modem (future software release) using the supplied adapter.

Note: Modem connection will require a modem adapter which will supplied by Avaya upon request (future version).

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide 43