Avaya M-ACCF/SF manual Clear Mac Address Table, Configuration Copy

Chapter 4 X-Switch CLI & ATM Terminal Interface

Clear Mac Address Table

Option 6 from the Main Menu 'Clear Mac Address Table', allows you to clear the MAC address table of the entire Avaya M770 domain from a single point. This is performed as follows (from the Main Menu):

>>>Enter your choice: 6

Proceed with clearing the MAC address table ? [Y/N] y

...MAC address table was cleared.

Reset is required to make the change effective. Reset now ? [Y/N] y

Resetting. Please Wait ...

<CR> Refresh the screen

Note: The above command takes effect only after you perform a reset (wait at least half a minute before resetting).

After system reset, the MAC address table on all modules in the DomainX is cleared.

Configuration Copy

Option 7 from the Main Menu 'Configuration Copy', allows you to copy the configuration of another M-ACC module to the current module.

Which module configuration do you wish to copy from ?

Enter slot number (range 1 to 7) or 'q' to quit :

ATM IP Configuration

Option 8 from the Main Menu 'ATM IP Configuration', allows you to show and set the IP Configuration of the ATM entity of the M-ACC.

ATM IP Configuration Menu
-------------------------
0.	Return to Previous Menu
1.	Set	IP Configuration
2.	Show	IP Configuration
	Please enter your choose:2
		IP Address	Netmask	Default Gateway
		---------------	---------------	---------------
		149.49.54.249	255.255.255.0	149.49.54.1

56 Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide