Avaya M-ACCF/SF manual Port Submenu 2,1, Operational Meanings of Port Submenu Items

Chapter 4 X-Switch CLI & ATM Terminal Interface

Note: Ensure that the ATM access module and the ATM Switch to which it is connected are set up to use the same signalling and SONET/SDH standards. The two devices should also use the same ILMI VCC, signaling VCC, and UNI version. If the devices do not use the same standards, they cannot communicate with each other.

Port Submenu [2,1]

The Port submenu enables port attributes display, statistics, and settings. See Figure 4.11.

Figure 4.11 Port Submenu

ATM Port Menu

=============

[1]	display	- Display port attributes
[2]	statistics	- Display port statistics
[3]	uni	- Change UNI version 3.0/3.1
[4]	address	- Display local ATM addresses
[5]	sigTimeRes	- Change Signalling Time Resolution
[6]	physical	- Administer ATM port physical parameters ->

Table 4.4 below explains the operational meaning of each of the submenu items above.

Table 4.4	Operational Meanings of Port Submenu Items
Port Submenu		Operational Meaning
Item
[1] display		Shows the current ATM port attributes. See Figure 4.12.
[2] statistics		Displays ATM port cell traffic statistics. See Monitoring
		the ATM Access Module76
[3] uni		Allows you to set the system to network interface
		version 3.0 or 3.1
[4] address		Displays the local ATM addresses
[5] sigTimeRes		Changes the Signalling time resolution
[6] physical		See ATM Port Physical Submenu below.

66 Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide