Avaya M-ACCF/SF manual Monitoring the ATM Access Module, ATM Port Statistics

Chapter 4 X-Switch CLI & ATM Terminal Interface

Caution: Before you reset the ATM access module, please check that the download is complete (download_success should be displayed in step 8 above). Any reset before the download is complete may make the module unusable.

9After the software upgrade procedure is completed, you must reset the ATM access module in order to validate the new software version.

Monitoring the ATM Access Module

This Section describes how to monitor the status and performance of your ATM access module and provides a brief overview of the additional statistics that are available when you install an ATM access module.

See the user guide that accompanies the ATM Switch for information about the statistics that are provided by the ATM Switch software.

ATM access module statistics screens are updated every 2 seconds to show the latest information.

The ATM access module provides the following statistics:

•ATM Port Statistics

•VCC Statistics

ATM Port Statistics

The ATM Port Statistics screen provides a top level summary of traffic levels on the ATM port. You can use the summary to estimate the amount of traffic on your network backbone, and to check the validity of the incoming connection.

To view the ATM Port statistics:

1Select the [2] atm option from the Main Menu. The ATM submenu is displayed, as shown in Figure 4.21.

Figure 4.21 ATM Submenu

ATM Menu

========

[1]	port	-	Administer	the ATM	port ->
[2]	vcc	-	Administer	VCCs ->

Select the [1] port option from the ATM submenu. The atm/port submenu appears. Then select the [2] statistics option.

76 Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide