Avaya M-ACCF/SF manual Assigning the M-ACC module IP address, Gateway and Netmask

Chapter 4 X-Switch CLI & ATM Terminal Interface

Assigning the M-ACC module IP address, Gateway and Netmask:

1Select Option 1 “Set IP Configuration”

2Check that the LED labelled OPR, on the ATM access module front panel is ON.

3Type the IP address, net mask and default gateway of the ATM access module when prompted.

Note: The default Gateway must be on the same Subnet as the IP address assigned in step 2 (above) for the ATM access module.

4 There is no need to perform a reset. Configuration Example:

Enter IP Address (149.49.54.249): 149.49.44.80

Enter Netmask (255.255.255.0): 255.255.255.0

Enter Default Gateway (149.49.54.1): 149.49.44.120

Note: If there are any errors, the new configuration settings are not saved. To save the new configuration settings, you must correct the errors by repeating the command.

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide 57