Avaya M-ACCF/SF Software Download to the X-Switch CPU, Entering Software Download Parameters

Chapter 4 X-Switch CLI & ATM Terminal Interface

Note: The “Reset the Module” option does not reset the entire hub; it resets the selected module only.

Software Download to the X-Switch CPU

You can download software to the X-Switch entity (CPU) of the M-ACC module using the TFTP/IP protocol. To enable the process, make sure there’s a reachable TFTP server in the network.

To download a software update to the M32-100T, use the Software Download option (option 2 from the Setup Main Menu). A screen similar to the following displays:

Software Download parameters (Using TFTP/IP). M-ACCF S/W Version: 4.0.7 Slot #: 5 <CR> Refresh the screen

0.Return to Previous Menu

1.Save the Session

2.List

----------------------------

3.TFTP Server and File parameters...

4.Start Software Download process

5.Monitor software download process...

>>>Enter your choice:

Entering Software Download Parameters

Select option 3 to enter the TFTP server, file and version parameters. The following prompts are displayed, with the current parameters displayed in every line:

TFTP Server IP address: 149.49.39.12

File Name: /home3/users/gk/vx/960cf/M-ACCF

Downloaded file will override the old version (4.0.7)

-----------------------------------------------------------

>>>Enter Server IP address [nnn.nnn.nnn.nnn]:135.49.60.115

>>>Enter File Name: c:\mng\agents\Macc

>>>Override version: 1 - (Version 4.0.7), [2 - (Version 4.0.7)]: 1

1Enter the TFTP Server IP address.

2Enter the filename (Macc) of the new software version (full path).

3Enter the version you wish to overwrite.

The M-ACC stores two software versions. It is recommended that you overwrite the oldest version. See the version number to find out which is the

Avaya M770 M-ACCF/SF ATM Access Modules User’s Guide 53