Advanced setup
The sub menus accessible in the Advanced menu are:
Advanced setup
Communication Menu
Master /Slave
Theater Setup
Line Out
Routing
Crossover Freq.
Filter Type
Delay
Remote Control
Firmware Versions
Factory Reset
Communication
The sub menus accessible in the Communication menu are:
Communication
Comm Address
Comm Speed
Comm Address
The Communication Address setting identifies the TDAI 2200’s to the PC interface or other Lyngdorf products. In master mode the amplifier setting is normally 1, and the addresses
Comm Speed
The Communication Speed setting is the RS232 Link interface speed. The default setting is 57600 baud. With different PC’s and different lengths of cables the settings can be changed to 9600 or 115200 baud. If a
Home Theater
If you are using a
(NOTE: do NOT test this feature with a CD signal running on the Analog input 1!)
When selecting other inputs the amplifier returns to the Default Volume
Master/Slave
As default a TDAI 2200 is set as a Slave. The Master setting should be used if you are using two TDAI 2200, e.g. for
25