Lyngdorf Audio TDAI 2200 owner manual Front Panel, Controls

Front Panel

TDAI 2200 Digital Amplifier

Controls

The buttons/controls on the front panel of the TDAI 2200 can all be operated either with direct presses or by operating the corresponding keys on the supplied remote control. All the keys on the front panel [except the Mains switch (1)] are duplicated on the remote control as well.

1.Mains switch

Powers the TDAI 2200 on/off.

Stand-by mode is selected by pressing the mute button (2) for 3 seconds or with the stand-by button on the remote control.

2.Mute

Toggles Mute mode on/off.

Pressing the Mute button for 3 seconds will set the TDAI 2200 in stand-by mode.

3.Analog Input selector

Changes to Analog input, or if already selected, cycles to the next Analog input. Switches the TDAI 2200 on from stand-by mode.

4.Digital Input selector

Changes to Digital input, or if already selected, cycles to the next Digital input. Switches the TDAI 2200 on from stand-by mode.

5.Display

Display with all information on menu system, status, active input selection and volume control.

6.Volume wheel

Optical encoded volume control wheel

7.Navigation keys

In normal operation mode the Up/Down toggles between bypass and the available Focus and Global filters whereas the Left/Right toggles between neutral and the available voicings.

In menu mode used for navigation in the menu system: Up/Down, Left/Right & Enter.

8.Menu button

Toggles Menu mode on/off

7