Lyngdorf Audio TDAI 2200 owner manual Protection, Mains, Trigger, Mechanical

Protection

Parameter	Value	Note
Grounding	Mains earth, chassis and audio
	ground are connected internally.
Output short circuit current	±40A
Output DC voltage	±5V @ <0.1Hz
Over temperature	All heat sinks and mains-trans-	Auto resetting thermal fuse in
	former.	mains transformer.

Mains

Parameter	Value	Note
Mains input connector	IEC 320 cold type	Mains lead supplied.
Mains voltage range	110-120V AC, 50–60Hz	115V version
Mains voltage range	220-240V AC, 50-60Hz	230V version
Internal mains fuse	8 Amp / 0.25A	115V version
Internal mains fuse	4 Amp / 0.1A	230V version
Power consumption	1.5 W	STANDBY mode.
Power consumption	35 W	OPERATE mode, no output.
Power consumption	116 W	2*37.5W/4ohms.
Power consumption	820 W	2*300W/4ohms.

Trigger

Parameter	Value	Note
Trigger Out connector	3.5mm (1/8”) mono jack	Case=Gnd, Tip=Input
Trigger Out voltage	12V DC	Short circuit protected

Mechanical

Parameter	Value	Note
Width	450mm (17.72”)
Depth	440mm (17.32”)
Height	100mm (3.94”)	Including feet.
Net weight	14.5Kg (32lb.)
Shipping weight	22.0Kg (48.5lb.)

35