Lyngdorf Audio TDAI 2200 owner manual Rear Panel

Rear Panel

MIC TRIGGER

OUT

1.Digital Input 1-3

RCA connectors for SPDIF input

2.Digital Output

Selected digital input is sent – full range or filtered via the DSP - to the Digital Output connector for daisy- chaining more than one TDAI 2200. The sample rate is fixed at 96 kHz. This output is also active when Analog input is selected.

3.Digital input 4

XLR Connector for AES input

4.Optical Digital input 5 Connector for Toslink input

5.Analog output

DAC output from DSP Section

6-8. Input

Single-ended Analog input L/R pairs 1-3

9-10. Input

Balanced Analog input L/R number 4

The connectors from 6-10 are only available if the optional AD-Converter module is mounted.

11.Loudspeaker terminals Loudspeaker output.

All Outputs are bridged and must never be connected to ground because of the DC offset to chassis

8