NETGEAR UTM5-100NAS, UTM50-100NAS manual Add Mode Config Record Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

.

Figure 7-26

4.Complete the fields, select the checkbox, and make your selections from the pull-down menus as explained Table 7-15.

Table 7-15. Add Mode Config Record Settings

	Item	Description (or Subfield and Description)
	Client Pool
	Record Name	A descriptive name of the Mode Config record for identification and
		management purposes.
	First Pool	Assign at least one range of IP pool addresses in the First Pool fields to enable
		the UTM to allocate these to remote VPN clients. The Second Pool and Third
	Second Pool
		Pool fields are options. To specify any client pool, enter the starting IP address
	Third Pool
		for the pool in the Starting IP field and enter the ending IP address for the pool in
		the Ending IP field.
		Note: Any IP pool should not be within the local network IP addresses. Use a
		different range of private IP addresses such as 172.173.xxx.xx.
Virtual Private Networking Using IPsec Connections			7-45

v1.0, January 2010