NETGEAR UTM50-100NAS, UTM5-100NAS manual Rebooting and Shutting Down the UTM

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

To generate the Network Statistic Report:

1.Locate the Network Statistics Report section on the Diagnostics screen.

2.Click Generate Network Statistics. The network statistics report is sent as an e-mail to the recipient that you specified on the Email Notification screen (see “Configuring the E-mail Notification Server” on page 11-5).

Rebooting and Shutting Down the UTM

You can perform a remote reboot (restart), for example, when the UTM seems to have become unstable or is not operating normally.

Note: Rebooting breaks any existing connections either to the UTM (such as your management session) or through the UTM (for example, LAN users accessing the Internet). However, when the reboot process is complete, connections to the Internet are automatically re-established when possible.

To reboot the UTM:

1.Locate the Reboot the System section on the Diagnostics screen.

2.Click the Reboot button. The UTM reboots. (If you can see the unit: the reboot process is complete when the Test LED on the front panel goes off.)

Note: See also “Rebooting Without Changing the Firmware” on page 10-21.

To shut down the UTM:

1.Locate the Reboot the System section on the Diagnostics screen.

2.Click the Shutdown button. The UTM shuts down.

Note: You can shut down the UTM using the Web Management Interface, but you cannot start up the UTM using the Web Management Interface.

11-48 Monitoring System Access and Performance

v1.0, January 2010