NETGEAR UTM5-100NAS, UTM50-100NAS manual Enable Dhcp Starting IP

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 4-1. VLAN Profile Settings (continued)

Setting	Description (or Subfield and Description)
Enable DHCP	Starting IP	Enter the starting IP address. This address specifies the first
Server	Address	of the contiguous addresses in the IP address pool. Any new
(continued)		DHCP client joining the LAN is assigned an IP address
		between this address and the Ending IP Address. The IP
		address 192.168.1.2 is the default start address.
	Ending IP	Enter the ending IP address. This address specifies the last
	Address	of the contiguous addresses in the IP address pool. Any new
		DHCP client joining the LAN is assigned an IP address
		between the Starting IP address and this IP address. The IP
		address 192.168.1.100 is the default ending address.
		Note: The starting and ending DHCP IP addresses should be
		in the same “network” as the LAN TCP/IP address of the
		UTM (the IP address in LAN TCP/IP section above).
	Primary DNS	This is optional. If an IP address is specified, the UTM
	Server	provides this address as the primary DNS server IP address.
		If no address is specified, the UTM uses the VLAN IP
		address as the primary DNS server IP address.
	Secondary DNS	This is optional. If an IP address is specified, the UTM
	Server	provides this address as the secondary DNS server IP
		address.
	WINS Server	This is optional. Enter a WINS server IP address to specify
		the Windows NetBios server, if one is present in your
		network.
	Lease Time	Enter a lease time. This specifies the duration for which IP
		addresses are leased to clients.
DHCP Relay	Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for a
	DHCP server somewhere else on your network. Enter the following setting:
	Relay Gateway	The IP address of the DHCP server for which the UTM serves
		as a relay.
Enable LDAP	Select the Enable LDAP information checkbox to enable the DHCP server to
information	provide Lightweight Directory Access Protocol (LDAP) server information. Enter
	the settings below.
	Note: The LDAP settings that you specify as part of the VLAN profile are used
	only for SSL VPN and UTM authentication, but not for Web and e-mail security.
	LDAP Server	The IP address or name of the LDAP server.

LAN Configuration 4-9

v1.0, January 2010