NETGEAR UTM5-100NAS, UTM50-100NAS manual Setup Wizard System Date and Time Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 2-3. Setup Wizard Step 3: System Date and Time Settings

Setting	Description (or Subfield and Description)
Set Time, Date and NTP Servers
Date/Time	From the pull-down menu, select the local time zone in which the UTM operates.
	The proper time zone is required in order for scheduling to work correctly. The
	UTM includes a real-time clock (RTC), which it uses for scheduling.
Automatically Adjust for	If daylight savings time is supported in your region, select the Automatically
Daylight Savings Time	Adjust for Daylight Savings Time checkbox.
NTP Server (default or	From the pull-down menu, select an NTP server:
custom)	• Use Default NTP Servers. The UTM’s RTC is updated regularly by contacting a
	default Netgear NTP server on the Internet.
	• Use Custom NTP Servers. The UTM’s RTC is updated regularly by contacting
	one of the two NTP servers (primary and backup), both of which you must
	specify in the fields that become available with this menu selection.
	Note: If you select this option but leave either the Server 1 or Server 2 field
	blank, both fields are set to the default Netgear NTP servers.
	Note: A list of public NTP servers is available at
	http://ntp.isc.org/bin/view/Servers/WebHome.
	Server 1 Name /	Enter the IP address or host name the primary NTP server.
	IP Address
	Server 2 Name /	Enter the IP address or host name the backup NTP server.
	IP Address

Using the Setup Wizard to Provision the UTM in Your Network 2-15

v1.0, January 2010