NETGEAR UTM50-100NAS, UTM5-100NAS manual Add Policy Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 8-10. Add Policy Settings (continued)

Item	Description (or Subfield and Description)
Apply	IP Network	Policy Name	A descriptive name of the SSL VPN policy for identification
Policy For			and management purposes.
(continued)
		IP Address	The network IP address to which the SSL VPN policy is
			applied.
		Subnet Mask	The network subnet mask to which the SSL VPN policy is
			applied.
		Port Range /	A port (enter in the Begin field) or a range of ports (enter in
		Port Number	the Begin and End fields) to which the SSL VPN policy is
			applied. Ports can be 0 through 65535. The policy is applied
			to all TCP and UDP traffic that passes on those ports. Leave
			the fields blank to apply the policy to all traffic.
		Service	From the pull-down menu, select the service to which the
			SSL VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the pull-down menu, select whether the policy permits
			(PERMIT) or denies (DENY) access.
	All	Policy Name	A descriptive name of the SSL VPN policy for identification
	Addresses		and management purposes.
		Port Range /	A port (enter in the Begin field) or a range of ports (enter in
		Port Number	the Begin and End fields) to which the SSL VPN policy is
			applied. Ports can be 0 through 65535. The policy is applied
			to all TCP and UDP traffic that passes on those ports. Leave
			the fields blank to apply the policy to all traffic.
		Service	From the pull-down menu, select the service to which the
			SSL VPN policy is applied:
			• VPN Tunnel. The policy is applied only to a VPN tunnel.
			• Port Forwarding. The policy is applied only to port
			forwarding.
			• All. The policy is applied both to a VPN tunnel and to port
			forwarding.
		Permission	From the pull-down menu, select whether the policy permits
			(PERMIT) or denies (DENY) access.

8-36 Virtual Private Networking Using SSL Connections

v1.0, January 2010