NETGEAR UTM5-100NAS, UTM50-100NAS manual SSL VPN Wizard of 6 Client IP Address Range and Routes

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

SSL VPN Wizard Step 4 of 6: Client IP Address Range and Routes

Figure 8-5

Note that Figure 8-5contains some examples. Enter the settings as explained in Table 8-4 on page 8-10, then click Next to go the following screen.

Note: Do not enter an existing route for a VPN tunnel client in the Destination Network and Subnet Mask fields, otherwise the SSL VPN Wizard will fail and the UTM will reboot to recover its configuration.

Note: After you have completed the steps in the SSL VPN Wizard, you can make changes to the client IP address range and routes by selecting VPN > SSL VPN > SSL VPN Client. For more information about client IP address range and routes settings, see “Configuring the SSL VPN Client” on page 8-25.

Virtual Private Networking Using SSL Connections 8-9

v1.0, January 2010