NETGEAR UTM50-100NAS, UTM5-100NAS manual Hardware Features, Front Panel

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Hardware Features

The front panel ports and LEDs, rear panel ports, and bottom label of the UTM are described below.

Front Panel

Viewed from left to right, the UTM front panel contains the following ports (see Figure 1-2 on page 1-10, which shows a dual-WAN port model, the UTM25):

•One non-functioning USB port: this port is included for future management enhancements. The port is currently not operable on the UTM.

•LAN Ethernet ports: four switched N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors.

•WAN Ethernet ports: one (single WAN-port models) or two (dual WAN port models) independent N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet ports with RJ-45 connectors.

The front panel also contains three groups of status indicator light-emitting diodes (LEDs), including Power and Test LEDs, LAN LEDs, and WAN LEDs, all of which are explained in Table 1-2.

Power LED			DMZ LED
	USB port	Left LAN LEDs		Left WAN LEDs

		Active
		WAN
Test LED		Right WAN LEDs LEDs
	Right LAN LEDs
Figure 1-2

1-10 Introduction

v1.0, January 2010