NETGEAR UTM50-100NAS, UTM5-100NAS manual V1.0, January

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

4.Click Apply to save your settings. The IPsec VPN policy is now added to the List of VPN Policies table on the VPN Policies screen. By default, the VPN policy is enabled.

Figure 7-10

Note: When using FQDNs, if the dynamic DNS service is slow to update their servers when your DHCP WAN address changes, the VPN tunnel will fail because the FQDNs do not resolve to your new address. If you have the option to configure the update interval, set it to an appropriately short time.

Using the NETGEAR VPN Client Security Policy Editor to Create a Secure Connection

From a PC with the NETGEAR ProSafe VPN Client installed, configure a VPN client policy to connect to the UTM:

1.Right-click on the VPN client icon in your Windows toolbar, select Security Policy Editor. Then, select Options > Secure, and verify that the Specified Connections selection is enabled (see Figure 7-11 on page 7-13).

7-12 Virtual Private Networking Using IPsec Connections

v1.0, January 2010