NETGEAR UTM5-100NAS, UTM50-100NAS manual Adding PCs or Devices to the Network Database

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Adding PCs or Devices to the Network Database

To add PCs or devices manually to the Network Database:

1.In the Add Known PCs and Devices section of the LAN Groups screen (see Figure 4-5 on page 4-14), enter the settings as explained in Table 4-2.

Table 4-2. Add Known PCs and Devices Settings

Setting	Description (or Subfield and Description)
Name	Enter the name of the PC or device.
IP Address Type	From the pull-down menu, select how the PC or device receives it IP address:
	• Fixed (set on PC). The IP address is statically assigned on the PC or device.
	• Reserved (DHCP Client). Directs the UTM’s DHCP server to always assign
	the specified IP address to this client during the DHCP negotiation (see
	“Setting Up Address Reservation” on page 4-17).
	Note: When assigning a reserved IP address to a client, the IP address
	selected must be outside the range of addresses allocated to the DHCP
	server pool.
IP Address	Enter the IP address that this PC or device is assigned in the IP Address field. If
	the IP Address Type is Reserved (DHCP Client), the UTM reserves the IP
	address for the associated MAC address.
MAC Address	Enter the MAC address of the PC or device’s network interface. The MAC
	address format is six colon-separated pairs of hexadecimal characters (0-9 and
	A-F), such as 01:23:45:67:89:AB.
Group	From the pull-down menu, select the group to which the PC or device is
	assigned. (Group 1 is the default group.)
Profile Name	From the pull-down menu, select the VLAN profile to which the PC or device is
	assigned. (The defaultVlan is the default VLAN group.)

2.Click the Add table button to add the PC or device to the Known PCs and Devices table.

3.As an optional step: To enable DHCP address reservation for the entry that you just added to the Known PCs and Devices table, select the checkbox for the table entry and click Save Binding to bind the IP address to the MAC address for DHCP assignment.

LAN Configuration 4-15

v1.0, January 2010