NETGEAR UTM5-100NAS, UTM50-100NAS Setup Wizard of 10 Saving the Configuration, Update Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 2-9. Setup Wizard Step 9: Signatures & Engine Settings

Setting Description (or Subfield and Description)

Update Settings

Update	From the pull-down menu, select one of the following options:
	• Never. The pattern and firmware files are never automatically updated.
	• Scan engine and Signatures. The pattern and firmware files are
	automatically updated according to the Update Frequency settings below.
Update From	Set the update source server by selecting one of the following radio buttons:
	• Default update server. Files are updated from the default NETGEAR update
	server.
	• Server address. Files are updated from the server that you specify: enter the
	IP address or host name of the update server.
Update Frequency

Specify the frequency with which the UTM checks for file updates:

• Weekly. From the pull-down menus, select the weekday, hour, and minutes that the updates occur.

• Daily. From the pull-down menus, select the hour, and minutes that the updates occur.

• Every. From the pull-down menu, select the frequency with which the updates occur. The range is from 15 minutes to 12 hours.

HTTPS Proxy Settings

Enable	If computers on the network connect to the Internet via a proxy server, select
	the Enable checkbox to specify and enable a proxy server. Enter the following
	settings:
	Proxy server	The IP address and port number of the proxy server.
	User name	The user name for proxy server authentication.
	Password	The password for proxy server authentication.

Setup Wizard Step 10 of 10: Saving the Configuration

Figure 2-16

Click Apply to save your settings and automatically restart the system.

Using the Setup Wizard to Provision the UTM in Your Network 2-25

v1.0, January 2010