NETGEAR UTM5-100NAS, UTM50-100NAS manual Manually Adding or Editing a VPN Policy

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

To delete one or more VPN polices:

1.Select the checkbox to the left of the policy that you want to delete or click the Select All table button to select all VPN policies.

2.Click the Delete table button.

To enable or disable one ore more VPN policies:

1.Select the checkbox to the left of the policy that you want to delete or click the Select All table button to select all IKE Policies.

2.Click the Enable or Disable table button.

To add or edit a VPN policy, see “Manually Adding or Editing a VPN Policy” on this page.

Note: You cannot delete or edit an IKE policy for which the VPN policy is active. You first must disable or delete the VPN policy before you can delete or edit the IKE policy.

Manually Adding or Editing a VPN Policy

To manually add a VPN policy:

1.Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs appear with the IKE Policies screen in view (see Figure 7-20 on page 7-24).

2.Click the VPN Policies submenu tab. The VPN Policies screen displays (see Figure 7-22 on page 7-32).

3.Under the List of VPN Policies table, click the Add table button. The Add VPN Policy screen displays (see Figure 7-23 on page 7-34, which shows a dual-WAN port model screen). The WAN1 and WAN2 radio buttons (next to Select Local Gateway) are shown on the Add VPN Policy screen for the dual-WAN port models but not on the Add VPN Policy screen for the single-WAN port models.

Virtual Private Networking Using IPsec Connections 7-33

v1.0, January 2010