NETGEAR UTM50-100NAS Setup Wizard of 10 Email Security, Setup Wizard Email Security Settings

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Setup Wizard Step 5 of 10: Email Security

Figure 2-11

Enter the settings as explained in Table 2-5, then click Next to go the following screen.

Note: After you have completed the steps in the Setup Wizard, you can make changes to the email security settings by selecting Application Security > Email Anti-Virus. The Email Anti-Virus screen also lets you specify notification settings and email alert settings. For more information about these settings, see “Customizing E-mailAnti-Virus and Notification Settings” on page 6-5.

Table 2-5. Setup Wizard Step 5: Email Security Settings

Setting	Description (or Subfield and Description)
Action
SMTP	From the SMTP pull-down menu, specify one of the following actions when an
	infected e-mail is detected:
	• Block infected email. This is the default setting. The e-mail is blocked, and a
	log entry is created.
	• Delete attachment.The e-mail is not blocked, but the attachment is deleted,
	and a log entry is created.
	• Log only. Only a log entry is created. The e-mail is not blocked and the
	attachment is not deleted.
POP3	From the POP3 pull-down menu, specify one of the following actions when an
	infected e-mail is detected:
	• Delete attachment. This is the default setting. The e-mail is not blocked, but
	the attachment is deleted, and a log entry is created.
	• Log only. Only a log entry is created.The e-mail is not blocked and the
	attachment is not deleted.
2-18	Using the Setup Wizard to Provision the UTM in Your Network

v1.0, January 2010