NETGEAR UTM50-100NAS, UTM5-100NAS manual IPsec VPN Wizard Settings for a Gateway-to-Gateway Tunnel

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Figure 7-5

3.Select the radio buttons and complete the fields and as explained Table 7-2.

Table 7-2. (IPsec) VPN Wizard Settings for a Gateway-to-Gateway Tunnel

Setting	Description (or Subfield and Description)
About VPN Wizard
This VPN tunnel will connect	Select the Gateway radio button. The local WAN port’s IP address or
to the following peers	Internet name appears in the End Point Information section of the
	screen.
Connection Name and Remote IP Type
What is the new Connection	Enter a descriptive name for the connection. This name is used to help
Name?	you to manage the VPN settings; the name is not supplied to the
	remote VPN endpoint.
What is the pre-shared key?	Enter a pre-shared key. The key must be entered both here and on the
	remote VPN gateway. This key must have a minimum length of
	8 characters and should not exceed 49 characters.

7-6 Virtual Private Networking Using IPsec Connections

v1.0, January 2010