NETGEAR UTM50-100NAS Setup Wizard Content Filtering Settings, Blocked Categories Scheduled Days

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Enter the settings as explained in Table 2-7, then click Next to go the following screen.

Note: After you have completed the steps in the Setup Wizard, you can make changes to the content filtering settings by selecting Application Security > HTTP/HTTPS

>Content Filtering. The Content Filtering screen lets you specify additional filtering tasks and notification settings. For more information about these settings, see “Configuring Web Content Filtering” on page 6-23.

Table 2-7. Setup Wizard Step 7: Content Filtering Settings

Setting Description (or Subfield and Description)

Blocked Web Categories

Select the Enable Blocking checkbox to enable blocking of Web categories. By default, this checkbox is deselected.

Select the checkboxes of any Web categories that you want to block. Use the action buttons at the top of the section in the following way:

•Allow All. All Web categories are allowed.

•Block All. All Web categories are blocked.

•Set to Defaults. Blocking and allowing of Web categories are returned to their default settings. See Table 6-1 on page 6-2for information about the Web categories that are blocked by default. Categories that are preceded by a green rectangular are allowed by default; categories that are preceded by a pink rectangular are blocked by default.

Blocked Categories Scheduled Days

Make one of the following selections:

•Select the All Days radio button to enable content filtering to be active all days of the week.

•Select the Specific Days radio button to enable content filtering to be active on the days that are specified by the checkboxes.

Blocked Categories Time of Day

Make one of the following selections:

•Select the All Day radio button to enable content filtering to be active all 24 hours of each selected day.

•Select the Specific Times radio button to enable content filtering to be active during the time that is specified by the Start Time and End Time fields for each day that content filtering is active.

2-22 Using the Setup Wizard to Provision the UTM in Your Network

v1.0, January 2010