NETGEAR UTM5-100NAS, UTM50-100NAS manual Network and System Management 10-25

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Table 10-3. System Date & Time Settings (continued)

Setting	Description (or Subfield and Description)
Automatically Adjust for	If daylight savings time is supported in your region, select the Automatically
Daylight Savings Time	Adjust for Daylight Savings Time checkbox.
NTP Server (default or	From the pull-down menu, select an NTP server:
custom)	• Use Default NTP Servers. The UTM’s RTC is updated regularly by
	contacting a default Netgear NTP server on the Internet.
	• Use Custom NTP Servers. The UTM’s RTC is updated regularly by
	contacting one of the two NTP servers (primary and backup), both of which
	you must specify in the fields that become available with this menu
	selection.
	Note: If you select this option but leave either the Server 1 or Server 2 field
	blank, both fields are set to the default Netgear NTP servers.
	Note: A list of public NTP servers is available at
	http://ntp.isc.org/bin/view/Servers/WebHome.
	Server 1 Name / IP Address	Enter the IP address or host name the primary
		NTP server.
	Server 2 Name / IP Address	Enter the IP address or host name the backup
		NTP server.

3.Click Apply to save your settings.

Note: If you select the default NTP servers or if you enter a custom server FQDN, the UTM determines the IP address of the NTP server by performing a DNS lookup. You must configure a DNS server address in the Network menu before the UTM can perform this lookup.

Network and System Management 10-25

v1.0, January 2010