Mazda Not a Manual manual QDSC OFF Indicator Light, QDSC OFF Switch

Driving Your Mazda

Starting and Driving

qDSC OFF Indicator Light

This indicator light stays on for a few seconds when the ignition is switched ON.

It also illuminates when the DSC OFF switch is pressed and TCS/DSC is switched off (page 5-28).

If the light stays on when the TCS/DSC is not switched off, take your vehicle to an Authorized Mazda Dealer. The dynamic stability control may have a malfunction.

NOTE

If the battery is disconnected or a fuse is replaced, the DSC will be inoperable. In this case, the DSC OFF indicator light flashes and the TCS/DSC indicator light illuminates.

To make the DSC operable, do the following procedure with the battery connected.

1.Switch the ignition ON.

2.Turn the steering clockwise fully, then turn it counterclockwise fully.

3.Make sure the DSC OFF indicator turn off.

4.Switch the ignition off, then switch the ignition to ON again.

5.Make sure the TCS/DSC indicator light turns off.

If the TCS/DSC indicator light and the DSC OFF indicator light remain illuminated even after switching the ignition from ON to OFF, and back to ON, attempt the procedure again. If this still does not resolve the issue, consult an Authorized Mazda Dealer.

qDSC OFF Switch

Press the DSC OFF switch to turn off the TCS/DSC. The DSC OFF indicator light illuminates.

Press the switch again to turn the TCS/ DSC back on. The DSC OFF indicator light turns off.

5-28