Mazda Not a Manual manual Activation/Deactivation, QTo Set Speed

Driving Your Mazda

Starting and Driving

qActivation/Deactivation

To activate the system, press the ON/OFF switch.

The cruise main indicator light illuminates.

To deactivate the system, press the switch again.

The cruise main indicator light turns off.

WARNING

Keep the ON/OFF switch off when cruise control is not in use:

Leaving the ON/OFF switch on when not using the cruise control is dangerous as you may hit one of the other buttons and put the vehicle in cruise control unexpectedly. This could result in loss of vehicle control.

NOTE

Head of the cruise ON/OFF switch is not kept at depressed position even when it is ON position. Height of its head is unchanged at ON or OFF position.

qTo Set Speed

1.Activate the cruise control system by pressing the ON/OFF switch.

2.Accelerate to the desired speed, which must be more than 30 km/h (19 mph).

3.Press down the cruise control SET/- switch and release it at the desired speed. Release the accelerator simultaneously.

Cruise

control switch

Do not continue to hold the switch. Until you release it, the speed will continue to decrease (unless you continue to accelerate) and you will miss the desired speed.

NOTE

lOn a steep grade, the vehicle may momentarily slow down while ascending,

or speed up while descending.

lCruise control will turn off if the vehicle speed decreases below 30 km/h (19 mph) when cruise is activated, such as when climbing a steep grade.

5-23