Mazda Not a Manual manual Audio System

Interior Comfort

Audio System

7.If it matches with the previously registered code, “ENTER PIN” appears again and it switches to code input mode.

8.“SR1 - - - -”appears, and it is ready for input of the new ID code.

(New ID code input)

9.Input the new ID code using channel preset buttons 1-4.

Example: If “1234” is input as the new code, “SR1 1234” is displayed.

(New ID code input determination)

10.Determine the new ID code which has been input by pressing the scan

button ( ).

11.“PIN CHANGED” appears for three seconds which indicates that the new ID code input has been completed.

12.It returns to the former display.

NOTE

lIf an ID code is not input for ten seconds,

“Err” is displayed and it returns to the former display.

lChannel preset buttons 1, 2, 3, 4 and the

scan button ( ) are used for input of the ID code. Buttons 5 and 6 cannot be used.

Individual channel locking

If a channel is locked, the channel is muted.

NOTE

If the registered ID code is forgotten, return the ID code to the default [0000]. (See “INTIALIZATION OF ID CODE” section)

(Locking a channel)

1.Select a channel to be locked by turning the manual tuning dial. Example: Select channel 100

(Registered ID code input preparation)

2.Press and hold the scan button ( ), then press channel preset button 6. Hold both buttons together for 1.5 seconds.

3.“ENTER PIN” appears for three seconds which indicates that it is in code input mode.

4.“SR1 - - - -”appears which indicates that it is ready for code input.

(Registered ID code input)

5.Input the registered ID code using channel preset buttons 1-4. Example: If the registered ID code is “2323”, input “2323”. At this time “SR1 2323” is displayed.

(Registered ID code input determination)

6.Determine the code which has been input by pressing the scan button

( ).

7.If it does not match the registered code, “SR1 Err” is displayed and then it returns to “SR1 - - - -”.

8.If it matches the registered code, “SR1 LOCK” appears for three seconds which indicates that the code input has been completed.

9.“SR1 LOCK 100” appears which indicates that the parental lock is activated. At this time, mute is on and no sound is heard.

6-43