18 Series LCD TV
INSTALLATION
1.Remove the LCD TV from the box and place it on a flat surface in a
2.Connect the output terminal of RF cable to the corresponding TV input terminal.
3.Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV with AV connecter. Ensure that every AV signal cable is connected correctly to the corresponding port.
4.Connect one side of PC, DVI terminals to the corresponding signal source terminal, and connect the other side to the corresponding LCD TV terminal. Screw down the thumbscrews on both sides to secure it. Affix the plug with care to avoid damage.
5.Connect the power cord to the AC outlet. Do ensure that other connected devices to the
same power source are switched off.
Caution:
Please refer the power range of this product to the back label on the back cover, do not connect to any power supply, which is out of this range. When unplugging the power cord, do not touch the metal part.
GENERAL OPERATION
To Turn the TV On
1.When you turn on the power, the indicator light on the front panel will blink till the TV displays pictures.
2.In Standby mode, press 【 】on the remote control or front panel to enter to Power On mode.
To Turn the TV Off
1.Press【
】on the remote control or【
】on the front panel to switch off the TV.
2.Unplug the power cord from the AC outlet to turn the TV off completely.
Caution: The TV will be shut off automatically when the power trips. The following will occur if the power cord is plugged the AC outlet then:
a.The TV will be in standby mode when switched on
b.The TV will be automatically on if it was in other modes (such as AV/PC mode) apart from TV mode
Do not turn on/off the TV too often
Auto Off if No Signal Input
The TV will automatically switch off and enter into Standby mode after 15 minutes if there is no signal, in cases of no program signal transmitted from the TV station or no commands from the remote control.
The AUTO OFF will be invalid after 15 minutes when there is no signal input.
Indicator Light
Status | Light Color | Description | |
Working mode | Blue | The TV works normally | |
|
|
| |
Standby | Red | In Standby Mode | |
Timer On | Blue | Timer On is valid. There is blue light when the | |
TV is in Standby Mode | |||
|
| ||
Power Off | No Indicator | The TV is turned off |
PAGE 11
